Neoware c50 - Thin Client User Manual page 426

Host Command Summary
LOADING CHARACTER SETS
Assign name to set currently selected for loading
Select set for loading & assign name
Select specified character set for loading
Specify character form in hex codes &
ASCII reference character
POSITION SELECTION
Select active position & move cursor to it
Specify position to move to via a PCV
using PCV active only for current command
Specify series of positions to move to. Post-
command active position = last specified position
Specify series of positions to move to. Post-command
active position = pre-command active position
Specify writing with first bit of pattern
REQUESTING REPORTS
Request report of active position
Request report of command set stored
for specified character
Request report of last detected error
Request report of name assigned to char.
set currently selected for loading
Request report of total & remaining space
available for storage of command sets
Select GIN mode
SCREEN SETTING
Select display addresing range
Scroll from specified coordinates
Scroll from specified position
Define hardcopy region
Specify printed image offset
Specify output map location lightness
value (monochrome monitor)
Specify output map location RGB character
Specify output map location HLS colour val.
Select specifed output map location
colour for background
Select output map location colour approx.
specified RGB character for background
Select output map location colour approx.
specified HLS values for background
Erase screen to current background
Erase screen to specified background
Specify time delay before command
Control cursor display
Set temporary writing controls
C-56
L(A ' set name ')
L(A set number ' set name ')
L(A set number )
L' ascii char ' hex codes
P[ coordinates ]
P(W(M pcm )) pcv
P(S) positions & options (E)
P(B) positions & options (E)
P[]
R(P)
R(M( character ))
R(E)
R(L)
R(M(=))
R(P(I)
S(A[ coords ][ coords ]
S[ coordinates ]
S(W(M pcm )) pcv
S(H positions )
S(H( positions )
S(M location (lightness ))
S(M location ( rgb character ))
S(M location ( hls values ))
S(I location )
S(I( rgb character ))
S(I( hls values ))
S(E)
S(I location ,E)
S(T time )
S(C control value )
S(W( sub-options ))