Regis Emulation - Neoware c50 - Thin Client User Manual

ReGIS Emulation

MODE SELECTION
Exit to VT100/VT200 mode
MOUSE BUTTON PROGRAMMING
Program a mouse button (*c = clear, *b = button,
*p = press code, *r = release code)
SIXEL GRAPHICS
Direct sixels to host
Direct sixels to printer
Transmit sixel data (*p = pixel shape,
*b = backgrnd colour *h = horiz. spacing, *..* = sixel data)
COMMAND LEVEL INPUT SELECTION
Select command level input
COMMAND SET STORING/INVOKING
Clear all stored command sets
Clear stored command set
Invoke command set
Store command set
CURVE DRAWING
Draw arc from specified start position
Draw arc with specified centre position
Draw circle with specified centre
Draw circle specified circum. point
Draw closed interpolated curve inter-
secting current & specified positions
Draw closed interpolated curve intersecting current &
specified positions, closed with a straight line
Draw open interpolated curve
Draw open interpolated curve inter-
secting current & all specified positions
Set temporary writing controls effective only for the
command, using 'W' Writing Control cmd & options
FILLING SHAPES
Define curved boundary shape for filling
using 'C' Curve Drawing com. & options
Define straight boundary shape for filling
using 'V' Draw Vector command & options
Set cursor position using 'P' command & options
Set temporary writing controls effective only for the
command using 'W' Writing Control cmd & options
Host Command Summary
ESC \
ESC P *c $ w *b/*p/*r ESC \
ESC [ ? 2 i
ESC [ ? 0 i or ESC [ ? 1 i
ESC P *p ; *b ; *h ; q *..* ESC \
;
@.
@: character @;
@ character
@: character set definition @;
C(A deg of drawing ) start posn
C(A deg of drawing C) centre posn
C(C) centre position
C circumference point
C(B) positions (E)
C(B)[] positions [](E)
C(S) positions (E)
C(S)[] positions [](E)
C options (W( sub-opts )) opts
F(C sub-options )
F(V sub-options )
F(P( sub-options ))
F(W( sub-options ) options)
C-55