The Status Bar - Neoware c50 - Thin Client User Manual

The Status Bar

The status bar displayed along the bottom of the window will show the status of
various operations.
F1 F2 F3 F4
Field 1: This will always display RUN, indiocating that the line shown corre-
sponds to normal operation.
Field 2: Indicates whether you are in Block or Character mode. In Block mode,
keyboard entered data is displayed and processed locally, allowing you to
edit it before a block of data is sent to the host. In Character mode,
keyboard entered data is sent simultaneously to the host and the display.
You can change the mode using the Operating Mode option in the BQ
3107 Settings dialog box.
Field 3: This will display a bell symbol when the terminal emulation receives a
BEL command from the host or when the user has pressed the wrong
key.
Field 4: Not used.
Field 5: Displays ERR when an error is detected.
Field 6: Displays BSY when the host is busy processing data. The keyboard will
be locked when this is displayed.
Field 7: This is used to display warning messages.
Field 8: Not used.
Field 9: Not used.
Field 10: This will display P.DISCT when the printer is disconnected.
Field 11: This will display OVERFLOW when there is a data overflow.
Field 12: Indicates the current line and column position of the cursor relative to the
top left corner of the display, which is L01:C01.
Field 13: This will display the current terminal emulation mode, 3107.
Field 14: This will display MESS when a message is waiting to be displayed on
the status line.
Field 15: This will display LINE when the emulation is online to the host, or
LOCAL when in local mode.
F5 F6 F7 F8 F9 F10 F11
BQ 3107 Emulation
F12 F13 F14 F15
8-3