Non-Wbt Mode; Modem Connection Settings - Neoware c50 - Thin Client User Manual

Getting Started

Modem Connection Settings

The Modem Settings dialog box can be displayed from the Connection Wizard Host
Information dialog box by setting the Connection Type to Modem then clicking the
Advanced button, or the New Connection dialog box when in non-WBT mode by
selecting Modem in the Type list box then clicking the Configure button.
This enables you to define a particular modem configuration which can be saved under
a specific name for future selection in the Host Information dialog box.
1. If this is a new configuration, enter a name to identify it in the Configuration
Name box.
2. Select a Modem from the list box below. The Configure button provides access
to the standard Microsoft dialog boxes for specifying port settings and call options.
3. Enter the Country Code, Area Code and Telephone Number.
4. Click the Dialing Properties button to display the standard Microsoft dialog
boxes for specifying a variety of dialing formats.
5. If you want the country and area codes to be ignored when dialing, select Force
Local. If you want the area code dialed even if you are in that area, select Force
long distance.
6. Click OK to save the settings and the name you assigned to this configuration will
appear in the Modem configuration selection box in the main Host Information
dialog box.
2-26