Flashing Characters Enabled In All Sessions; Reflection 4 Colour Support; Graphics Redraw On Resize - Neoware c50 - Thin Client User Manual

Flashing Characters Enabled In All Sessions

Registry Entry: None
Command Line: -FB
Default Setting: off
This enables characters with the flashing attribute to be displayed as such in all session
windows in addition to the currently focused window.

Reflection 4 Colour Support

Registry Entry: iR4colours = "on"
Command Line: -R4
Default Setting: off
These commands will cause the colours displayed by the emulator to be compatible
with Reflection 4 software.

Graphics Redraw On Resize

Registry Entry: GraphicsRedraw = "off" / "all" / "on"
Command Line: -G0-2
Default Setting: on
Only applicable to versions of TeemTalk that support graphics emulations. TeemTalk
logs ReGIS or Tek graphics data in local memory by default so that if the window is
resized the graphics can be quickly redrawn. This command enables you to prevent
logging of data, log graphics data only (default), or log both text and graphics (from
which TeemTalk will use just the graphics data when the window is resized). Note that
specifying redraw text and graphics may cause TeemTalk to run out of memory. The
valid settings are as follows:
-G "off" No redraw
-G0 "off" No redraw
-G1 "on" Redraw graphics
-G2 "all" Redraw text & graphics
Initialization Commands
20-17