Table of Contents
Advertisement
Gigabit Ethernet Switch User's Guide
3. Configure the Flow Control setting for the port.
Select On for the switch to automatically negotiate
the correct flow control setting for this port. Select
Off for no flow control.
4. Configure the Priority setting for packets passing
through this port, using IEEE 802.1 tagging. Select
Normal, High or Low. If the network is congested,
the switch handles packets with a higher priority
before those with lower priority.
5. Click Apply to let your changes take effect.
Port Mirror
The Switch allows you to copy frames transmitted and
received on a port and redirect the copies to another
port. You can attach a monitoring device to the
mirrored port, such as a sniffer or an RMON probe, to
86
Web-Based Network Management
Advertisement
Table of Contents
