D-Link DGS-3204 - Switch - EN 100VG-AnyLAN User Manual page 53

Figure 6-5. Add/Modify User Account screen
3. Type in your Username and press Enter.
4. If you are a new user, type in the Old Password and
press Enter.
5. Type in the New Password you have chosen, and press
Enter. Type in the same new password in the
following field to verify that you have not mistyped it.
6. Determine whether the new user should have Normal
User or Administrator privileges.
7. Choose the APPLY command to let the password
change take effect.
This method can also be used by an Administrator-level
user to change another user's password.
Using the Console Interface
Gigabit Ethernet Switch User's Guide
:
39