to move between selected items. It is recommended
that you use the tab key and backspace key for moving
around console.
4. Items in UPPERCASE are commands. Moving the
selection to a command and pressing Enter will
execute that command, e.g. SAVE, EXIT, etc.
First Time Connecting To The Switch
The Switch supports user-based security that can allow you
to prevent unauthorized users from accessing the Switch or
changing its settings. This section tells how to log onto the
Switch.
Note:
The passwords used to access the Switch are case
sensitive; therefore, "S" is not the same as "s."
When you first connect to the Switch, you will be
presented with the first login screen (shown below).
Press Ctrl+R (hold down the Ctrl key, press the R key,
and release both keys) to call up the screen, if the initial
login screen does not appear. Also Ctrl+R can be used at
any time to refresh the screen.
Using the Console Interface
Gigabit Ethernet Switch User's Guide
33