Table of Contents
Advertisement
Gigabit Ethernet Switch User's Guide
Figure 6-28. Forwarding Tabl
To browse by MAC address, select MAC address in the
Search by field, enter the desired MAC address in the next
field, and then press FIND.
To browse by port number, select Port in the Search by field,
enter the desired port in the next field, and then press
FIND.
A forwarding table containing Port, MAC Address, and
Learned status is located on the lower part of the screen.
Resetting the Switch
You can use the console interface to reset the Switch, either
doing a Restart System (which restarts the Switch and is
identical to powering the Switch off and back on again) or a
Using the Console Interface
75
Advertisement
Table of Contents
