Table of Contents
Advertisement
Gigabit Ethernet Switch User's Guide
view details about the packets passing through the
first port.
To configure a mirror port, select Enabled from the
Status pull-down list. In the first field, select the
source port from where you want to copy frames. In
the second field, select the port which receives the
copies from the source port. This is the port where you
will connect a monitoring/troubleshooting device such
as a sniffer or an RMON probe.
Trap Manager
To use the trap manager function featured on this Switch,
enter the desired community string and IP address of the
trap receiving station (up to four are allowed). A trap
receiving station is a device that constantly runs a network
management application to receive and store traps. Click
apply to put the settings into effect
Web-Based Network Management
87
Advertisement
Table of Contents
