Table of Contents
Advertisement
Gigabit Ethernet Switch User's Guide
VT-100/ANSI compatible
Arrow keys enabled
9,600 baud
8 data bits
No parity
One stop bit
You can also access the same functions over a TELNET
interface. Once you have set an IP address for your Switch,
you can use a TELNET program (in a VT-100 compatible
terminal mode) to access and control the Switch. All of the
screens are for the most part identical, whether accessed
from the console port or from a TELNET interface.
Console Usage Conventions
The
console
interface
conventions:
1. Items in <angle brackets> can be toggled on or off
using the space bar, excepting the entries on the Port
Configuration screen .
2. Items in [square brackets]can be changed by typing
in a new value. You can use the backspace and delete
keys to erase characters behind and in front of the
cursor.
3. The up and down arrow keys, the left and right arrow
keys, the tab key and the backspace key, can be used
32
makes
use
of
the
Using the Console Interface
following
Advertisement
Table of Contents
