D-Link DGS-3204 - Switch - EN 100VG-AnyLAN User Manual page 75

Gigabit Ethernet Switch User's Guide
defined here briefly as follows. Dynamic Filtering is
defined when a dynamic entry is created by the Learning
Process as a result of observation of network traffic in the
Filtering Database. Static Filtering is defined as static
entries that may be added and removed from the Filtering
Database by the user. They are not automatically removed
by any timeout mechanism.
To access the Custom Filtering Table, select Configure
Forwarding and Filtering Table from the System
Configuration menu. Then select Custom Filtering Table
from the bottom of the Filtering and Forwarding Table
Configuration screen. The following screen appears:
Figure 6-19. Custom Filtering Table screen
To make a change to the Custom Filtering Table, choose
Add-Filter-Both or Remove in the Action field. Then enter
the MAC Address and press APPLY.
Using the Console Interface 61