Figure 6-15. STP Parameters Setting screen
3. Change the Disabled setting to Enabled in the
Spanning Tree Protocol field.
4. Enter the Bridge Max Age in the Max Age(6-40 sec)
field.
5. Enter the Bridge Hello Time in the Hello Time(1-10 sec)
field.
6. Enter the Bridge Forward Delay time in the Forward
Delay(4-30 sec) field.
7. Enter the Bridge Priority in the Bridge Priority(0-
65535) field.
The information on the screen is described as follows:
Spanning Tree Protocol Select Enabled to
implement the Spanning Tree Protocol.
Using the Console Interface
Gigabit Ethernet Switch User's Guide
53