Gigabit Ethernet Switch User's Guide
Firmware and Configuration Update
The
Switch
is
capable
configuration information, as well as updated versions of
its internal firmware, using TFTP (the Trivial File Transfer
Protocol) and BOOTP (the BOOTstrap Protocol). You can
use the Firmware and Configuration Update screen to
control this feature.
Choose Firmware and Configuration Update on the
Switch's main menu. The following screen appears:
Figure 6-20. Firmware and Configuration Update screen
The fields you can set are:
Software Update Mode Set to either Network or SLIP.
Determines whether the configuration file should be
obtained through the Ethernet network or through
the console port.
62
of
obtaining
its
boot-time
Using the Console Interface