Table of Contents
Advertisement
Gigabit Ethernet Switch User's Guide
Choose
Configure
Port
Mirroring
on
the
System
Configuration
menu
to
access
the
Port
Mirroring
Configuration screen:
Figure 6-13. Port Mirroring Configuration screen
To configure a mirror port, select the port from where you
want to copy frames in the Source Port field. Then select
the port which receives the copies from the source port in
the Target Port field. The target port is where you will
connect a monitoring/troubleshooting device such as a
sniffer or an RMON probe.
Configure Spanning Tree Protocol
The Spanning Tree Algorithm Parameters can be used for
creating alternative paths in your network. The Protocol
Parameters allow you to change the behind the scene
parameters of the Spanning Tree Algorithm at the bridge
level. The parameters for this section have been fully
Using the Console Interface
51
Advertisement
Table of Contents
