Firmware And Configuration Update - D-Link DES-3624i User Manual

Firmware and Configuration Update

To update firmware or change a configuration file, fill in the requested information above and then click the Apply
button.
The information is described as follows:
Software Update Mode & TFTP Server Address:
Software Update Mode Set to either Network or SLIP. Determines whether the new firmware code should
be obtained through the Ethernet network or through the console port.
TFTP Server Address The IP address of the TFTP server where the new firmware code is.
Last TFTP Server Address This read-only field displays the IP address of the last TFTP server accessed.
Update Management Module Firmware:
Firmware Update Determines whether or not the Switch should download its new firmware code the next
time it is booted.
File Name The path and the name of the file which holds the new firmware code on the TFTP server.
Change Configuration File:
156
Figure 7-52. Firmware and Configuration Update window
Stackable NWay Ethernet Switch User's Guide
Web-Based Network Management