Sntp Client Poll Timer - D-Link DES-3010FA-TAA - Switch 10/100MBPS Mgmt Manual

D-Link DES-3010FA/GA CLI Reference Guide

sntp client poll timer

The sntp client poll timer Global Configuration mode command sets the polling time for the Simple Network
Time Protocol (SNTP) client. To return to default configuration, use the no form of this command.
Syntax
sntp client poll timer seconds
no sntp client poll timer
Parameters
•
seconds — Polling interval in seconds (Range: 60-86400)
Default Configuration
Polling interval is 1024 seconds.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Examples
The following example sets the polling time for the Simple Network Time Protocol (SNTP) client to 120 seconds.
Console(config)# sntp client poll timer 120
Page 55