Show Rmon History - D-Link DES-3010FA-TAA - Switch 10/100MBPS Mgmt Manual

D-Link DES-3010FA/GA CLI Reference Guide

show rmon history

The show rmon history User EXEC mode command displays RMON Ethernet history statistics.
Syntax
show rmon history index {throughput | errors | other} [period seconds]
Parameters
•
index — Specifies the requested set of samples. (Range: 1 - 65535)
•
throughput — Indicates throughput counters.
•
errors — Indicates error counters.
•
other — Indicates drop and collision counters.
•
seconds — Specifies the period of time in seconds. (Range: 1-4294967295)
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
There are no user guidelines for this command.
Examples
The following examples displays RMON Ethernet history statistics for index 1.
Console> show rmon history 1 throughput
Sample Set: 1
Interface: 1
Requested samples: 50
Maximum table size: 500
Time
--------------------
Jan 18 2002 21:57:00
Jan 18 2002 21:57:30
Console> show rmon history 1 errors
Sample Set: 1
Interface: 1
Requested samples: 50
Owner: CLI
Interval: 1800
Granted samples: 50
Octets Packets
--------- -------
303595962 357568
287696304 275686
Owner: Me
Interval: 1800
Granted samples: 50
Page 185
Broadcast Multicast
---------- ---------
3289 7287
2789 5878
Util
-----
19%
20%