Table of Contents
Advertisement
permit (Management)
The permit Management Access-List Configuration mode command defines a permit rule.
Syntax
permit [ethernet interface-number | vlan vlan-id | port-channel port-channel-number]
permit ip-source ip-address [mask mask | prefix-length] [ethernet interface-number | vlan vlan-id | port-channel
port-channel-number]
Parameters
•
interface-number — A valid Ethernet port number.
•
vlan-id — A valid VLAN number.
•
port-channel-number — A valid port channel index.
•
ip-address — A valid source IP address.
•
mask — A valid network mask of the source IP address.
•
prefix-length — Number of bits that comprise the source IP address prefix. The prefix length must be pre-
ceded by a forward slash (/). (Range: 0 - 32)
Default Configuration
If no permit rule is defined, the default is set to deny.
Command Mode
Management Access-list Configuration mode
User Guidelines
Rules with Ethernet, VLAN and port-channel parameters are valid only if an IP address is defined on the appropri-
ate interface.
The system supports up to 128 management access rules.
Example
The following example permits all ports in the mlist access list.
Console(config)# management access-list mlist
Console(config-macl)# permit
Page 144
Management ACL
Advertisement
Table of Contents
