Table of Contents
Advertisement
D-Link DES-3010FA/GA CLI Reference Guide
radius-server key
The radius-server key Global Configuration mode command sets the authentication and encryption key for all
RADIUS communications between the device and the RADIUS daemon. To return to the default configuration, use
the no form of this command.
Syntax
radius-server key [key-string]
no radius-server key
Parameters
•
key-string — Specifies the authentication and encryption key for all RADIUS communications between the
device and the RADIUS server. This key must match the encryption used on the RADIUS daemon.
(Range: 0-128 characters)
Default Configuration
The key-string is an empty string.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example sets the authentication and encryption key for all RADIUS communications between the
device and the RADIUS daemon as default.
Console(config)# radius-server key
Page 175
Advertisement
Table of Contents
