Ip Https Port - D-Link DES-3010FA-TAA - Switch 10/100MBPS Mgmt Manual

D-Link DES-3010FA/GA CLI Reference Guide

ip https port

The ip https port Global Configuration mode command specifies the TCP port to be used by the Web browser
interface. To return to the default configuration, use the no form of this command.
Syntax
ip https port port-number
no ip https port
Parameters
•
port-number — Port number for use by the HTTPS server. (Range: 1 - 65534)
Default Configuration
The default port number is 80.
Command Mode
Global Configuration mode
User Guidelines
Use the crypto certificate generate Global Configuration mode command to generate an HTTPS certificate.
Specifying 0 as the port number effectively disables https access to the device.
Example
The following example configures the HTTPS port number to 100.
Console(config)# ip https port 100
Page 315