D-Link DES-3010FA/GA CLI Reference Guide
show lacp ethernet
The show lacp ethernet Privileged EXEC mode command displays LACP information for Ethernet ports.
Syntax
show lacp ethernet interface [parameters | statistics | protocol-state]
Parameters
•
interface — Valid Ethernet port. (Full syntax: port)
•
parameters — Link aggregation parameter information.
•
statistics — Link aggregation statistics information.
•
protocol-state — Link aggregation protocol-state information.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example display LACP information for Ethernet port 1.
Console# show lacp ethernet 1
Port 1 LACP parameters:
Actor
system priority:
system mac addr:
port Admin key:
port Oper key:
port Oper number:
port Admin priority:
port Oper priority:
port Admin timeout:
port Oper timeout:
LACP Activity:
Aggregation:
synchronization:
collecting:
1
00:00:12:34:56:78
30
30
21
1
1
LONG
LONG
ACTIVE
AGGREGATABLE
FALSE
FALSE
Page 131