Table of Contents
Advertisement
D-Link DES-3010FA/GA CLI Reference Guide
spanning-tree bpdu
The spanning-tree bpdu Global Configuration mode command defines BPDU handling when the spanning tree is
disabled globally or on a single interface. To return to the default configuration, use the no form of this command.
Syntax
spanning-tree bpdu {filtering | flooding}
Parameters
•
filtering — Filter BPDU packets when the spanning tree is disabled on an interface.
•
flooding — Flood BPDU packets when the spanning tree is disabled on an interface.
Default Configuration
The default setting is flooding.
Command Modes
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example defines BPDU packet flooding when the spanning-tree is disabled on an interface
Console(config)# spanning-tree bpdu flooding
Page 233
.
Advertisement
Table of Contents
