Table of Contents
Advertisement
D-Link DES-3010FA/GA CLI Reference Guide
P r o bl e m s
Add and Edit pages do not
open.
Lost password
Page 345
P os s i bl e C a u s e
A pop-up blocker is enabled.
CONFIDENTIAL
Document Classification: Proprietary Information
Sol ut i on
Disable pop-up blockers.
The Password Recovery Procedure
enables the user to set the password back
to the default setting. The Password
Recovery Procedure is invoked from the
Startup menu:
1. Reboot the system either by discon-
necting the power supply, or enter the
command
, the following mes-
reboot
sage is displayed:
Console> reload
Are you sure you want to reboot
the system (y/n)[n]?
2. Enter Y. The device reboots. After the
POST, when the text "
2 seconds - press RETURN or
Esc. to abort and enter
" is displayed, press <Enter>.
prom.
The Startup Menu is displayed.
[1] Download software
[2] Erase flash file
[3] Erase flash sectors
[4] Password Recovery Procedure
[5] Enter Diagnostic Mode
[6] Back
3. Enter 4 within 15 seconds after the
bootup process from the StartUp
menu. If the selection is not made in
the allotted time, the current accessi-
bility requirements are erased and the
system continues to upload. The pass-
word is defined using the CLI mode.
4. Enter the CLI mode.
5. Enter the password command using
the following syntax:
password [level level]
password [encrypted]
For example:
enable password
level 1 password *****
6. Enter the command exit. The CLI
mode is exited.
Autoboot in
enable
Copyright © 2005
April 22, 2005
Advertisement
Table of Contents
