Printing and queue management
3- 2 0
Printing LCDS Sample Resources
To print LCDS resources:
1. Right-click on a resource and select [Sample] menu
option. The Sample Resources window allows you to specify
how you want the sample resource to print.
2. For example, select:
•
A queue
•
Image Output
•
Scaling
•
Document Options
•
Quantity
Printing the LCDS Resource List
To print the LCDS resource list:
1. In the LCDS Resources field, right-click and select [Print List]
menu option to print a list of LCDS resources on the system.
2. Specify how you want the list to print. For example, select:
•
A queue
•
Sides Imaged
•
Quantity
3. Select the [Print] command button.
LCDS Queue information
To set up queues for LCDS jobs, you should consider the
following:
•
The Destination Save property is not used for LCDS jobs.
•
When you set up a queue for LCDS jobs, you must define
whether the job will be printed in spooling or streaming mode:
•
Use Streaming if you want jobs to print while they are still
in the process of being sent to the printer. This is useful for
long jobs. Chunks of data are printed as they are received.
Printing does not wait for the entire job to be received, and
there is less chance of the disk becoming full.
In general, for on-line printing of large jobs, use a queue
that has been set up for streaming mode.
When a job has been sent to the printer in streaming
mode, END must be selected in the On-line Manager
before RIPping can begin.
•
Use Spooling only if you want jobs to print after the entire
data stream has been received at the printer. This means
you must enter a Drain command to complete each job.
System Guide