The Configure-Xdss Script; Disable Lp Anonymous Printing; Digipath And Decomposition Services - Xerox DocuPrint 115 System Manual

Security and Network Setup

The configure-xdss script

4-8
During the DocuSP installation, the configure-xdss script will run.
A question, "Do you wish to enable DocuSP Security" is asked at
the prompt. When answered with a
y
for yes, additional prompts concerning security features will
follow. This section explains the options available when you
have chosen to enable the DocuSP Security feature.

Disable LP Anonymous Printing

You can select if you wish to disable anonymous printing on all
existing LP printer queues that are associated with the DocuSP
virtual printers. Select
y
for yes to disable this printing option.

DigiPath and Decomposition Services

DigiPath serves as a transferring station for files to the DocuSP
server. The DigiPath configuration will ask two questions.
1. Do you want to disable DigiPath? If you answer "yes", both
FTP and the bwnfs daemon are disabled. The bwnfs daemon
is not required by DigiPath when NetAgent is being used to
share files that have been saved on the DocuSP Controller.
2. If the answer to question 1 is "No", you are prompted with the
question, "Do you want to disable DigiPath Decomp
services?" If you answer "Yes", the nfs.server and bwnfs
daemons will be disabled. When nfs.server is disabled, no
directory can be made available for other systems to mount
using UNIX NFS. Any third-party application that uses
MaestroNFS requires the bwnfs daemon to be enabled. Both
XPert Label software and also DigiPath Decomp Services
use MaestroNFS and thus require a "No" answer to this
question.
NOTE: Before answering yes to this question, ensure that the
save repository is not normally shared and that other workflows
or third party applications do not require this capability.
When DigiPath is enabled, the ftp and NFS servers work
correctly.
System Guide
Common Controller