Xerox 6100BD - Phaser Color Laser Printer System Manual page 132

Hints and Tips
Utility
/opt/XRXnps/bin/setVPSoption
/opt/XRXnps/bin/setBind128
/opt/XRXnps/bin/setpdfsuppresscsa
/opt/XRXnps/bin/setpantonetoprocess
/opt/XRXnps/bin/setpdfbinarycheck
/opt/XRXnps/bin/setsweepdither
/opt/XRXnps/bin/setonesideduplexat
devicedeact
9- 1 0
Change Description
On the socket gateway mainframe
echo commands are stripped by
default. If non VPS streaming clients
are being used, this utility must be run
to avoid data loss.
Enables you to bind 128 pages.
When PDF files are created with
Adobe Acrobat Distiller 5.0 and
above, the output may have color
management applied by default. This
results in text printing as halftoned
images. The Xerox FreeFlow Print
Server is rendering the file correctly,
however, this is often not a desired
output.
This script determines how pantone
calls are handled by the Xerox
FreeFlow Print Server.
Enables/Disables PDF binary check.
System default is enabled. If you
disable it, PDF performance may be
impacted.
Enables/Disables sweep dither level.
Customer jobs that contain Sweeps
that are created with PS Level 3
Printer Driver using the
SmoothSHading PostScript operator
may exhibit Contours when printed on
the Xerox FreeFlow Print Server.
Default is on and set to 1.
This utility command allows a
combination of duplex and simplex
subset finishing.
Disabling the utility causes the Xerox
FreeFlow Print Server PostScript
decomposer to ignore the commands
to eject a duplex page as a one-sided
page. The entered job prints in duplex
mode. This is the current default
behavior of the decomposer.
Enabling the utility, the decomposer
prints in simplex when it encounters
the appropriate PostScript command
that deactivates duplex mode. The
resulting output is a combination of
duplex and simplex pages.
Focus
Black and
white
Black and
white
Black and
white
Color
Both
Color
Both
System Guide