Printing and queue management
Administration page controls
3- 1 0
–
The Print Server supports values of 1, 3, 6, and 8. Values of 2,
4, 5, and 7 are treated as if they were 1, 3, 6, and 8
respectively.
Photometric Interpretation
–
Default = none; value must be supplied.
–
The Print Server supports bi-level values of 0 and 1 only.
Resolution Units
–
Default = 2
–
The Print Server supports values of 2 (inches) and 3
(centimeters)
Rows Per Strip
–
Default = none
–
The Print Server supports single and multiple strip images.
NOTE: Strips and tiles cannot be intermixed within the same TIFF
file.
Strip Byte Counts and Strip Offsets
–
Default = none; values must be supplied if the image data is
organized into strips.
–
The Print Server supports single and multiple strip images.
X and Y Resolution
–
Default = none
–
Values must be supplied for printing.
Tile Width, Tile Length, Tile Offsets, Tile Byte Counts
–
Default = none
–
Values must be supplied if image data is organized into tiles.
The Print Server permits the user to enable or disable the printing
of Administration/Banner pages on a queue or job basis. This
allows the site to control when and how the banner and error
pages are printed.
The default setting by queue is set to enabled. The behaviors of
the banner and error pages follow Print Server precedence, that is
overrides, job level and so forth.
System Guide