Canon LBP 2460 - B/W Laser Printer Service Manual page 75

Notes: 1. Indicates the area where the laser beam writes on the drum.
2. If no paper size is specified by the paper size specification command from the video
controller during manual feed, the printer does not recognize the paper width. So the
T1 and T2 values are assumed to be UNIVERSAL size (297.0mm
maximum paper width for this printer.
3. The CPU detects when the trailing edge of the paper passes through the registration
paper sensor (PS1) determining the paper size of the loaded paper. The image is then
masked according to the detected paper size.
/BD
T1
MSK
3 mm
Figure 2-3-3
3 mm
CHAPTER 2
635.0mm), the
2 - 29