Canon LBP 2460 - B/W Laser Printer Service Manual page 167

3. Disassembly/reassembly
a. Fixing roller heater
1) Disconnect the 2 claws that hold the
wire cover to the fixing unit, and then
remove the wire cover.
Claws Wire cover
Figure 3-6-4
2) Remove the 2 screws and the fixing unit
lead wire.
Screws Lead wire
Figure 3-6-5
3) Take out the 2 connectors.
4) Disconnect the heater claw of the holder
and remove the holder. Then, gently pull
out the fixing heater from the fixing
upper roller.
Connectors Claw
Heater holder Fixing heater
Figure 3-6-6
CHAPTER 3
3 - 25