Canon LBP 2460 - B/W Laser Printer Service Manual page 197

2. Disassembly/ assembly
a. Lifter clutch
1) Remove the screw.
2) Remove the clutch cover and bushing,
then take out the lifter clutch.
Screw
Bushing
Figure 3-11-7
b. Deck motor
1. Removal from the main unit
1) Remove the 4 screws, and take out the
deck motor.
Screws
Figure 3-11-8
Clutch cover
Lifter clutch
Deck motor
C. Limit Switch
1. Removal from the main unit.
1) Remove the 2 screws, then take off the
upper cover.
Screws
Figure 3-11-9
2) Pull out the tray.
3) Remove the rear cover.
4) Remove the connector.
5) Take out the screw and slide the stay in
direction of the arrow to remove.
Connector
Stay
Figure 3-11-10
CHAPTER 3
Upper cover
Screw
3 - 55