Canon LBP 2460 - B/W Laser Printer Service Manual page 146

CHAPTER 3
4. Rear cover
1) Open the upper cover.
2) Open the pick-up unit door.
3) Remove the 2 screws, the claw, and the
right rear cover.
Screws Claw
Right rear cover
Figure 3-1-10
4) Remove the 6 screws and take off the
rear cover.
Screws Rear cover
Figure 3-1-11
3 - 4
5. Delivery cover unit
1) Open the delivery cover unit.
2) Remove the 2 rods holding the delivery
cover unit to the printer.
3) Slightly lift the delivery cover unit, pull
out the right side first, then the left.
Rods Delivery cover unit
Figure 3-1-12