Canon LBP 2460 - B/W Laser Printer Service Manual page 156

CHAPTER 3
2. Disassembly/reassembly
a. Pick-up motor
1) Undo the connector.
2) Remove the 2 screws, and slide the
pick-up motor out in the direction of the
arrow.
Connector Screws
Pick-up motor
Figure 3-3-4
3 - 14
b. Feed clutch
1) Disconnect the connector.
2) Remove the screw, and disconnect the 2
claws to remove the pick-up PCB.
Connector Screws
Claws Pick-up PCB
Figure 3-3-5
3) Undo the claw and remove the clutch
fixing plate.
4) Remove the E-ring, and then the feed
clutch.
Claw Clutch fixing plate
E-ring Feed clutch
Figure 3-3-6