Canon LBP 2460 - B/W Laser Printer Service Manual page 245

Message
IN MOTION after new paper was loaded.
OUTPUT FULL The specified output bin is full.
CHECK BIN 1
OUTPUT FULL The specified output bin is full.
CHECK BIN 2
OUTPUT FULL The specified output bin is full.
CHECK BIN 3
OUTPUT FULL The specified output face-down tray is full.
STD. TRAY
LOWER MISSING The lower cassette is not in the printer or is
not correctly positioned.
UPPER MISSING The upper cassette is not in the printer or is
not correctly positioned.
PAPER DECK The specified Tray is missing.
MISSING
DUPLEX OPTION The duplexing unit has been removed or is
ERROR no longer properly seated.
ENVELOPE The envelope feeder has been removed or is
OPTION ERROR no longer properly seated.
PAPER DECK The paper deck has been removed or is no
OPTION ERROR longer properly connected.
STACKER OPTION The Stapler Stacker has been removed or is
ERROR no longer properly connected.
CHECK INPUT A paper jam occured near the input tray.
TRAY
OPEN FRONT A paper jam occured near the front cover.
COVER
OPEN LEFT A paper jam occured near the left cover.
COVER
OPEN RIGHT A paper jam occured near the right cover.
COVER
OPEN TOP COVER A paper jam occured near the upper cover.
1 PAPER JAM Paper jam has occurred somewhere in the
paper path.
2 PAPER JAM Paper jam has occurred in the input paper
path.
3 PAPER JAM Paper jam has occurred in the input paper
path.
4 PAPER JAM Paper jam has occurred in the fixing unit
area.
5 PAPER JAM Paper jam has occurred in the fixing unit
Meaning
CHAPTER 4
Action
Remove the paper from the tray.
Remove the paper from the tray.
Remove the paper from the tray.
Remove the paper from the
face-down tray.
Reinsert the lower cassette.
Reinsert the upper cassette.
Reinsert the tray.
Reinsert the duplexing unit into
the printer.
Reinsert the envelope feeder
into the printer.
Reconnect the paper deck to the
printer.
Re-connect the Stapler Stacker
to the printer.
Check the area specified.
Check the area specified.
Check the area specified.
Check the area specified.
Check the area specified.
Remove the jammed paper from
the paper path. The upper cover
must be opened and closed to
resume. printing.
Remove the jammed paper from
the paper path. The upper cover
must be opened and closed to
resume. printing.
Remove the jammed paper from
the paper path. The upper cover
must be opened and closed to
resume. printing.
Remove the jammed paper from
the paper path. The upper cover
must be opened and closed to
resume. printing.
Remove the jammed paper from
4 - 31