Canon LBP 2460 - B/W Laser Printer Service Manual page 198

CHAPTER 3
6) Remove the connector from the stay,
then take the cable out of the band.
7) Remove the screw, then take out the
limit switch.
Connector
Cable
Limit switch
Figure 3-11-11
3 - 56
Cable bands
Screw
D. Pick-up Unit
1. Removal from the main unit.
1) Remove the feed unit by following steps
1 to 3 on page 3-58.
2) Pull out the tray.
3) Remove the right and rear covers.
4) Remove the 4 connectors, then take the
cable out of the bands.
Connectors
Cable
Figure 3-11-12
Cable bands