2. Removal of the Envelope Side Guides
Left front guide
Left rear guide
Right rear guide
Right front guide
Figure 3-8-7
1) Remove the rear, front, lower and upper
covers.
2) Remove the 6 screws and take out the
guides from underneath.
Screws
Figure 3-8-8
3. Removal of the Envelope Feeder Pick-
up Motor
1) Remove the rear, front, lower and upper
covers.
2) Remove the envelope side guides as
shown in steps 1 and 2 of this page.
3) Remove the C-ring, the gear and the
rack.
C-ring
Gear
Rack
Figure 3-8-9
4) Remove the connector.
Connector
Figure 3-8-10
CHAPTER 3
3 - 41