CHAPTER 3
b. Power supply fan (FM2)
1) Remove the right rear and rear covers.
2) Disconnect the connector.
Connector
Figure 3-1-22
3) Remove the 2 screws, and then the
power supply fan.
Screws
Power supply fan
Figure 3-1-23
3 - 8
c. Electrical unit fan (FM3)
1) Remove the right rear and rear covers.
2) Remove the left rear cover.
3) Undo the connector.
4) Pinch the 2 claws holding the electrical
unit fan and pull out the fan.
Connector
Claws
Electrical unit fan
Figure 3-1-24