Manual Feed Pick-Up Unit - Canon LBP 2460 - B/W Laser Printer Service Manual

3) Remove the gear, the spring, the E-ring,
the bushing, and then the registration
lower roller.
Gear
Spring
E-ring
Bushing
Registration lower roller
Figure 3-3-14
D. Manual Feed Pick-up Unit
1. Removal from the printer
1) Remove the front cover.
2) Remove the rear cover.
3) Remove the multi-purpose tray.
4) Open the pick-up unit door.
5) Disconnect the connector, and then
remove the cable from the cable guide.
Connector Cable guide
Cable
Figure 3-3-15
6) Remove the 4 screws, and then the

manual feed pick-up unit.

Screws
Manual feed pick-up unit
Figure 3-3-16
CHAPTER 3
3 - 17