Customizing The Monitor Display; Installing Additional Drives - Compaq AP200 - Professional - 128 MB RAM Reference Manual

Customizing the Monitor Display

If you choose to customize your monitor display, you can manually select or
change the monitor brand, model, refresh rates, color, resolution, and power
management settings.
To customize the display using Windows NT Workstation 4.0, complete the
following steps:
1. Click Start, then click Settings.
2. Click Control Panel, then double-click the Display icon.
3. Click the Settings tab.
4. In the Desktop Area box, drag the pointer to the desired resolution.
5. In the Color Palette box, select the number of colors you want to
display.
6. Select List All Modes and choose a mode from the list of valid modes.
Click OK for the changes to take effect.
7. Click Test to test the changes made to the display settings.
8. Click Yes if the test bitmap was properly displayed.
9. Click OK for the changes to take effect.

Installing Additional Drives

The workstation supports up to five drives which may be installed in various
configurations.
When installing additional IDE drives, follow these guidelines:
For optimal performance, connect hard drives to the primary controller.
Connect expansion devices, such as IDE CD-ROM, tape, and diskette
drives to the secondary controller.
You may install either a third-height or a half-height drive into a half-
height bay.
Compaq Professional Workstation AP200 Reference Guide
4-19