Compaq AP200 - Professional - 128 MB RAM Reference Manual page 142

E-4 Error Codes
Power-On Self-Test Messages
201-Memory Error
203-Memory Address
Error
207-ECC Corrected
Single Bit Errors in
DIMM/SIMM Pair(s) X,
X, ...
213-Incompatible
DIMM Module in
DIMM Socket(s) X, X,
...
* L = Long, S = Short
Message Beeps*
None
None
2S
2S
Continued
Probable Cause
RAM failure.
RAM failure.
Single Bit ECC error.
A DIMM module in DIMM
socket identified in the error
message is missing critical
SPD information, or is
incompatible with the chipset.
Recommended Action
1. Make sure your
memory module(s)
(if any) are installed
properly.
2. Replace the
memory module(s).
3. Replace system
board.
4. Make sure your
memory module(s)
(if any) are installed
properly.
5. Replace the
memory module(s).
6. Replace system
board.
Replace DIMM if error
persists.
Replace the DIMM with a
module conforming to
the SPD standard. See
Chapter 4, "Hardware
Upgrades."
Continued