Using The Emergency Stop Switch - Brother RH-981A Instruction Manual

7-2. Using the EMERGENCY STOP switch

3139Q
1. Press the EMERGENCY STOP switch (1).
* All sewing operations will stop and the buzzer will sound. At this time, the warning indicator (2) will flash and
"E-60" will flash in the detail display (3).
* If the upper shaft could not stop in the needle up stop position, "E-10" will flash in the detail display (3). In this
case, turn the upper shaft pulley by hand to set the upper shaft to the needle up stop position. (Align the
marks.)
2. Eliminate the cause of the problem.
3. Release the EMERGENCY STOP switch (1).
4. In automatic mode:
• If continuing on with sewing, press the
press the start switch (4). (Sewing will then restart.)
Note: The start switch (4) will not work unless you not press the
• To stop sewing, press the RESET key (5). (The feed bracket will return to the cloth setting position.)
In test feed mode or in manual mode:
• Press the RESET key (5). (The feed bracket will return to the cloth setting position.)
and keys to determine the position to resume sewing from. Then
RH-981A
key at least once.
7. SEWING
3058Q
3140Q
46