Changing The Mode During An Operation; 7-10.Moving The Cloth Feed Bar (-52 Specifications) - Brother RH-981A Instruction Manual

7-9. Changing the mode during an operation

7-10. Moving the cloth feed bar (-52 specifications)
• If you press the SELECT key (1) during test feeding,
you can change the mode to manual sewing in
manual sewing mode.
• If you press the SELECT key (1) while pressing and
holding the ENTER key (2) during test feeding, you
can change the mode to resewing enabled in
automatic sewing mode.
• If you press the SELECT key (1) during manual
sewing mode, you can change the mode to test
feeding in test feeding mode.
• If you press the SELECT key (1) while pressing and
holding the ENTER key (2) during manual sewing,
you can change the mode to resewing enabled in
automatic sewing mode.
3067Q
While pressing the RESET key (1), press the
or the key.
The cloth feed bar will then move in the right direction
or the left direction.
* This operation is only possible when the cloth feed
plate is in the left setting position (home condition).
3068Q
RH-981A
7. SEWING
key
52