3-2. Installing the motor
1. Insert the four nuts (1) into the work table.
2. Turn the work table upside down to make it easier to
install the motor (2).
3. Align the holder plate (3) and the motor plate (4)
with the nuts (1), and then install them with the four
washers (5), the four spring washers (6) and the
four bolts (7).
4. Place the eight accessory cushions (7) and the four
accessory cushion collars (8) onto the motor base
plate (9), and then install the motor as shown in the
Note: The vibration of the motor may cause the bolts
to come loose. Make sure that the bolts are