Bezel View - HP StorageWorks 6400/8400 - Enterprise Virtual Array User Manual

6. Install the HP StorageWorks MPX200 bezel:
a. Remove the four 10-32 x 3/8 in. screws that secure the rack rails to the front of the rack.
b. Position the bezel support plate in front of the MPX200 chassis, with the arrows pointing
up.
c. Replace the four 10-32 x 3/8 in. screws, two on each side of the bezel support plate.
d. Install the bezel by pushing it through the white pop-in tabs on the bezel support plate
14).
1. Screw, panhead, 10-32 x 3/8 in.
2. Bezel mount bracket
Figure 14 Bezel view
.
36 Installing the MPX200
3. Bracket arrows
4. Bezel
(Figure