Set System - HP StorageWorks 6400/8400 - Enterprise Virtual Array User Manual

set system

Displays or changes the system attributes of an MPX200 blade.
Session: admin
Example:
MPX200 <1> (admin) #> set system
A list of attributes with formatting and current values will follow.
Enter a new value or simply press the ENTER key to accept the current value.
If you wish to terminate this process before reaching the end of the list
press 'q' or 'Q' and the ENTER key to do so.
A list of attributes with formatting and current values will follow.
Enter a new value or simply press the ENTER key to accept the current value.
If you wish to terminate this process before reaching the end of the list
press 'q' or 'Q' and the ENTER key to do so.
System Symbolic Name (Max = 64 characters)
Target Presentation Mode (0=Auto, 1=Manual)
Controller Lun AutoMap (0=Enable, 1=Disable)
Target Access Control (0=Enable, 1=Disable)
Telnet (0=Enable, 1=Disable)
SSH (0=Enable, 1=Disable)
System Log Level (Default,Min=0, Max=2)
All attribute values that have been changed will now be saved.
[Blade-1
[Auto
[Disabled
[Enabled
[Enabled
[Enabled
[0
MPX200 Multifunction Router
]
]
]
]
]
]
]
191