Setting Up Snp For The Hp Nc3Xxx Multifunction Gigabit Server Adapter; Iscsi Initiator Setup For Apple Mac Os X (Single-Path); Setting Up The Iscsi Initiator For Apple Mac Os X - HP StorageWorks 6400/8400 - Enterprise Virtual Array User Manual

To download the SNP package and for more details, see http://support.microsoft.com/kb/912222.
NOTE:
Windows Server 2003 SP2 includes SNP functionality.

Setting up SNP for the HP NC3xxx Multifunction Gigabit server adapter

SNP works in conjunction with the HP NC3xxx Multifunction Gigabit server adapters for Windows
2003 only.
To set up SNP on a Windows 2003 server:
1. Following the manufacturer's installation instructions, install the hardware and software for the
NC3xxx Multifunction Gigabit server adapter.
2. Download the SNP package from the Microsoft website:
912222.
• To start the installation immediately, click Run.
• To copy the download to your computer for installation at a later time, click Save.
A reboot is required after successful installation.
3. After the reboot, verify the TCP off-load settings by opening a command prompt window and
entering the following command:
C:\>netsh interface ip show offload
The following is displayed:
Offload Options for interface "33-IP Storage Subnet" with index: 10003:
TCP Transmit Checksum
IP Transmit Checksum
TCP Receive Checksum
IP Receive Checksum
TCP Large Send TCP Chimney Offload.
4. To enable or disable the TOE Chimney feature, enter one of the following commands:
C:\>netsh int ip set chimney enabled
C:\>netsh int ip set chimney disabled
For more information, see http://support.microsoft.com/kb/912222.

iSCSI initiator setup for Apple Mac OS X (single-path)

The EVA4400 and EVA connectivity option supports ATTO Technology's Xtend SAN iSCSI Initiator
for Mac OS X . For details, see http://www.attotech.com.

Setting up the iSCSI initiator for Apple Mac OS X

1. Install the Xtend SAN iSCSI Initiator 3.10.
http://support.microsoft.com/kb/
MPX200 Multifunction Router 65