Presenting Luns To The Qlogic Iscsi Initiator; Installing The Hp Mpio Full Featured Dsm For Eva; Iscsi Hba Port Connections - HP StorageWorks 6400/8400 - Enterprise Virtual Array User Manual
Hp storageworks mpx200 multifunction router user guide (5697-0202, february 2010)
Hide thumbs
Also See for StorageWorks 6400/8400 - Enterprise Virtual Array:
- User manual (150 pages) ,
- Software manual (86 pages) ,
- Reference manual (48 pages)
Table of Contents
Advertisement
Presenting LUNs to the QLogic iSCSI initiator
To present LUNs to the QLogic iSCSI initiator:
1.
Follow the procedure in
• Create an iSCSI host.
• Present LUNs to the iSCSI host.
2.
On the iSCSI HBA tab
LUNs in SMS under the HBA iSCSI port.
Figure 62 iSCSI HBA port connections
.
Use the Microsoft iSCSI initiator services to manage the iSCSI target login and LUN load-balancing
policies.
Installing the HP MPIO Full Featured DSM for EVA
Follow the procedure in the Installation and Reference Guide, available at
http://h20000.www2.hp.com/bizsupport/TechSupport/DocumentIndex.jsp?contentType=SupportManual&
lang=en&cc=us&docIndexId=64179&taskId=101&prodTypeId=18964&prodSeriesId=421492.
After installing the HP MPIO Full Featured DSM for EVA, open Computer Management to view and
control the iSCSI LUNs
Step 2
on page 58 to:
(Figure
62), verify that the QLogic iSCSI HBA is connected to the iSCSI
(Figure
63).
MPX200 Multifunction Router
97
Advertisement
Table of Contents
Troubleshooting
