HP StorageWorks 6400/8400 - Enterprise Virtual Array User Manual page 340

#%d: QLUpdateInitiat-
74784
orData: No more room in
Initiator Database.
#%d: QLSetTargetData: No
74800
more room in Target Data-
base.
#%d: ql_process_error:
OB_TCP_IOCB_RSP_W re-
75008
turned DdbInx 0x%x pTpb
%p
#%d: QLDisable: Restart
86347
RISC
#%d: QLEnable: Restart
86349
RISC to update EEPROM
#%d: QLIsrDecodeMailbox:
86874
Link up
#%d: QLGetFwStateCall-
87346
back: link 100Mb FDX
#%d: QLGetFwStateCall-
87348
back: link 1000Mb FDX
#%d: QLGetFwStateCall-
87350
back: Invalid link speed
0x%x
#%d: qlutm_init: Diagnost-
102419
ic failed, port 1 invalid
SRAM
#%d: qlutm_init: Diagnost-
102420
ic failed, port 1 POST
failed
#%d: qlutm_init: Diagnost-
102421
ic failed, port 2 invalid
SRAM
#%d: qlutm_init: Diagnost-
102422
ic failed, port 2 POST
failed
#%d: qlutm_init: Failed
102423
to return diagnostic res-
ult to Bridge
#%d: QLInitializeAdapter:
102656
Reset ISP failed
#%d: QLInitializeAdapter:
102657
Load RISC code failed
340 Log messageslog messages
Driver's initiator database is full. The driver is
capable of storing 1024 iSCSI initiators in its
iSCSI Error
database. Use the CLI or GUI to remove un-
wanted/unused iSCSI initiators.
Driver's target database is full. Use the CLI or
iSCSI Error GUI to remove unwanted/unused iSCSI tar-
gets.
TCP retry for a frame failed on the connection
iSCSI Error ddbIndex. Tpb contains the frame memory
address.
iSCSI Info Restart iSCSI processor (RISC).
EEPROM updated, restart iSCSI processor
iSCSI Info
(RISC).
Link up reported by iSCSI processor for GE1
iSCSI Info
or GE 2.
iSCSI controller reported a link speed/config-
iSCSI Info
uration of 100 Mb full-duplex (FDX).
iSCSI controller reported a link speed/config-
iSCSI Info
uration of 1000 Mb FDX.
iSCSI Info iSCSI controller reported an invalid link speed.
FC Fatal FC1 processor SRAM test failed.
FC Fatal FC1 processor power-on self-test (POST) failed.
FC Fatal FC2 processor SRAM test failed.
FC Fatal FC2 processor POST failed.
FC Fatal FC processor failed to return diagnostic results.
FC Fatal FC processor failed reset.
FC Fatal FC processor firmware load failed.