Rescanning Targets - HP StorageWorks 6400/8400 - Enterprise Virtual Array User Manual

4. To see the configuration details for a specific job, enter the appropriate job ID.
The following is an example of the use of the CLI to view the status of data migration jobs:
MPX200 <1> (admin) (miguser) #> show migration
Migration State Type ( 1=Running 2=Failed 3=Completed 4=All ) : 4
Job Owner
ID
--- -----
0 1
Please select a Migration Job Id from the list above ('q' to quit): 0
Migration Information
---------------------
Job Id
Job Owner
Job Description
Group Name
Migration Type
Priority
Migration Status
I/O Size
Migration State
Migration Performance
Start Time
End Time
Delta Time
Source Array
Source Lun VPG:ID
Source Lun WWULN
Source Lun Size
Destination Array
Destination Lun VPG:ID
Destination Lun WWULN
Destination Lun Size
Number of DRL Blocks

Rescanning targets

To determine whether one or more data LUNs are exposed to the router ports from the target, you
can rescan the target ports. A rescan causes the router to create an array entity for the target ports
through which the router is able to see data LUNs.
To rescan targets in the GUI:
1. In the mpx Manager left pane, right-click the FC Discovered Targets node.
2. From the shortcut menu, click Rescan.
In the left pane under the FC Arrays node, the GUI shows the newly-generated array entity.
Alternately, you can click Refresh two or three times to rescan the targets and generate the array
entity for targets that are exposing LUNs to the router.
Type Status
---- ------------------------
Offline Running ( 96%)
0
b1
HP HSV210-3:VPG1:001 to HP MSA2012fc-0:VPG1:001
Group 0
Offline
Not Applicable
Running
64 KB
96% Complete
86 MBps
Fri Oct 9 10:56:56 2009
---
---
HP HSV210-3
1:1
60:05:08:b4:00:05:4d:94:00:00:f0:00:35:a1:00:00
10.00 GB
HP MSA2012fc-0
1:1
60:0c:0f:f0:00:d5:9a:cb:4d:00:25:4a:01:00:00:00
10.24 GB
0
Job Description
------------------------------
HP HSV210-3:VPG1:001 to HP MS..
MPX200 Multifunction Router 169