Power Cord - HP StorageWorks 6400/8400 - Enterprise Virtual Array User Manual

Hp storageworks mpx200 multifunction router user guide (5697-0202, february 2010)
Hide thumbs Also See for StorageWorks 6400/8400 - Enterprise Virtual Array:
Table of Contents

Advertisement

5.
Route the power cord:
a.
Starting from the front of the rack, connect the power cord to the MPX200.
b.
For the left blade, the cord by following the gap between the chassis and the chassis rail
(Figure
13).
c.
Repeat for the right blade.
NOTE:
The right blade requires the power cord to extend approximately 12 in. (30 cm) beyond
the front edge, due to the positioning of the socket on the PCM.

1. Power cord

Figure 13 Power cord
.
MPX200 Multifunction Router
35

Advertisement

Table of Contents
loading

Table of Contents